Condition: 100% Brand New Item Type: Oscilloscope DIY Kit Highest Real-time Sampling Rate: 1Msps Accuracy: 12Bit Sample Buffer Depth: 1024 Bytes Analog Bandwidth: 0-200KHz Vertical Sensitivity: 10mV/Div – 5V/Div (Progressive by 1-2-5) Vertical Displacement adjustable with indication Input Impedance: 1MΩ Maximum Input Voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe) Coupling Methods: DC/AC/GND Horizontal Time Base Range: 10μs/Div – 50s/Div (Progressive by 1-2-5) 1、Structural optimization, more reliable to use, with increased external trigger input and wider application. 2、Waveform data output (not real-time), upload the waveform to the PC, save and view the waveform with the PC. 3、With automatic, regular and single trigger mode, it is convenient to capture instantaneous waveforms. 4、Trigger on the rising or falling edge, the trigger level is adjustable and with an indication. 5、The waveform before the trigger (negative delay) can be observed, and the waveform display (HOLD function) can be held at any time. 6、Comes with a 1KHz/3.3V square wave test signal source, convenient to use. 7、With the waveform parameter digital display, the parameters that can be displayed are: frequency, period, pulse width, duty ratio, maximum value, minimum value, average value, peak-to-peak value and effective value. 8、Save/recall the waveform and waveform does not disappear when shutdown. 1 x Display Board 1 x Motherboard 2 x Plug 4 x Button Switches 2 x Terminal 2 x Terminal with Cable 5 x Capacitor (100uF) 1 x Cylindrical Channel 20 x Resistor 1 x Diode 4 x Slide Switches 2 x Pin Header 3 x Flat Resistor 2 x Probe Head 2 x Round Socket 1 x Instruction Manual