Welcome to our AutoKey's Store. We provide a wide range of repairs and replacement keyfobs, as well as offering a cut to code or picture service. If you want to cut/copy the key blade, please click here to pay the cutting blade extra fee. Condition: 100% Brand New Color: Black Button: 2/3 Button (Lock/Unlock/Trunck) Chip: ID67 /4C Electronics Board: Yes P/N: 50171 Frequency: 433MHZ Battery: No Fitment: for Toyota Prado120 : 09/2004 to 08/2009 (Built Date) for Toyota RAV4: 7/2003 to 11/2005 (Built Date) for Toyota Kluger: 8/2003 to 5/2007 (Built Date) for Toyota Avensis: 10/2003 to 2010 (Built Date) for Toyota Tarago: 4/2003 to 1/2006 (Built Date) Note - if the ID number and chip type doesn't match, please don't buy. It will not work. Programming Manual Remote 1. Open Driver side door 2. Put the Original key in and out of ignition 2 times 3. Close and open driver door 2 times 4. Original Key in and out once 5. Shut and open door twice 6. Close door 7. Put Original Key in the ignition and Turn ignition on 8. Turn ignition off and remove key 9. Door locks will cycle 10. Do the following for all remotes: Pre lock and unlock together for 1s, then pre the lock button 11. Locks will cycle put key in ignition turn to on then off 12. Remove key from ignition, close door and test remote To Delete All Remotes from the Vehicle At Step 7, turn the key on and off 5 times then remove key, door locks will cycle 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed. Program keys 1. Put Original master key in and out of ignition 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in) 2. Open and shut door 6 times 3. Remove original key and insert the new key (Do not turn the key, just insert it into the ignition 4. Leave for 60s (or til light goes out) 5. After 60s security light stops flashing then you can start car. 6. Take key out 7. Open and shut door If you make a mistake at any point in the procedure, use original key to start the car. Take the key out, open and close door. Now you are ready to start again. Important Note: 1. The selling item is a new DIY remote key. Frequency 433.92MHz, with ID66 blank chip. 2. The remote key includes key housing, circuit board, chip and battery. It's a full remote key. 3. You'll need to program the key and cut the blade at locl automotive locksmith before using. 4. If your part number isn't exactly the same as 89070 05010, please don't buy. It will not work. Package Includes: 1 X Remote Car Key