Fiber Optic Fusion Splicer X Or Y Axes 400X Magnification Automatic Fiber Splicing Machine Item Type: Fiber Fusion Splicer Applicable Fiber: SM (G.652 G.657), MM (G.651), DS (G.653), NZDS (G.655), custom fiber type Splicing Loss: 0.02dB (SM), 0.01dB (MM), 0.04dB (DS NZDS) Return Loss: Better than 60dB Typical Connection Time: 9 Seconds Typical Heating Time: 26 Seconds (heating time can be set, heating temperature can be adjusted) Fiber Optic Alignment: Fine Alignment, Core Alignment, Cladding Alignment Fiber Diameter: Cladding diameter 80-150μm. Coating diameter 100-1000μm Cutting Length: Coating Layer 250μm Below: 8-16mm; Coating Layer 250-100um: 16mm Tension Test: Standard 2N Fiber Optic Fixture: Multifunctional fixture, suitable for bare fiber, tail fiber, jumper, and leather wire; Replacing fixture can be used for SC and other connectors for various FTTx fiber optic cables Magnification Factor: 400X (X Axes or Y Axes) Heat Shrink Tubing: 60mm, 40mm, and a series of micro shrink tubing Display: 5.0 Inch TFT color LCD display screen, content can be flipped, convenient for dual way operating External Interface: USB interface, convenient for data downloading and software updates Fusion Mode: 17 Sets Usage Mode Heating Mode: 9 Sets Usage Mode Connection Loss Storage: Store 5000 latest connection results in built in memory Battery Life: Can be continuously fused and heated for no less than 200 times Power Supply: 1 x 6700mAh Rechargeable Li Battery, Charging Time ≤ 3.5H; (included) Power Saving Function: Can save 15% of li battery power in typical environments Working Temperature: -10-50℃ Working Temperature: <95% RH (without condensation) Working Altitude: 0-5000m Maximum Wind Speed: 15m/s Lighting Function: Convenient for placing optical fibers at night Size: Approx. 390 x 300 x 210mm / 15.4 x 11.8 x 8.3in