GA4062A LCD Digital Spectrum Analyzer Signal Analyzer Machine 9kHz‑1.5GHz Condition: Item Type: Spectrum Analyzer Model: GA4062A Aging Rate: ±0.1 PPM/year Cursor Frequency Readout Accuracy: Cursor resolution: (frequency sweep width)/(scan number -1) (start, notification, center, cursor) Uncertainty: ± (frequency indication * frequency reference uncertainty +1%* sweep width +10&* resolution bandwidth + cursor resolution +1Hz) Cursor Frequency Counter: Highest resolution: 1Hz Frequency Sweep Range: Zero sweep width, 100Hz ~ maximum frequency Value: Resolution: 1Hz SSB Phase Noise: < -100dbc/hz-@ 10KHz Resolution Bandwidth: 1Hz-3MHz Measurement Range: +30dBm to display the average noise level Maximum Safety Input Level: +30dBm (1W), DC: 50V Display Average Noise: ≤ -148dbm, -160dbm (typical value) Level Measurement: Units: dBm, dBmV, dBμV, dBμV/m,μV, mV, V, mW, W Geophone: Positive Peak, negative peak, sampling detection, normal detection Level Measurement Error: ± (0.6db + frequency response); Frequency response: ±1dB; ±1dB (typical value) Reference Level: Setting range: -110dbm ~ +30dBm Stray Response: Second harmonic distortion: < -70db Third-order Intermodulation Distortion: < -70dbc Intrinsic Residual Response: < -88dbm (typical value) Scanning Time Range: 10ms-3000s (SPAN > 100Hz) Scanning Mode: Continuous, Single Trigger source: free trigger, level trigger, external trigger RF Input: Connector and Impedance: N-type female head; 50 Ω (nominal value); VSWR < 1.5:1 External Interface: USB, LAN, RS232 or VGA (either) Automatic Test Functions: Phase noise, Adjacent Channel power, bandwidth occupancy, third order intermodulation, Pass/Fail, standing wave ratio Display: 8.5-inch TFT LCD; In the interface Frequency Rating: 50/60/400Hz Power consumption: ≤35W Size: Approx. 410 x 210 x 136mm / 16.1 x 8.3 x 5.4in Weight: Approx. 7670g / 16.9lb