Features Suitable Models: The dust cover is applicable to the front cover of most 40mm to 54mm angle grinder, which can be installed on most 4in 4.5in 5in angle grinders. Wide Compatibility: This dust cover is compatible for Hitachi, for FLEX, for METABO, for HILTI, for BOSCH, for Kress, for FESTOOL, for Stanley, etc. Intimate Design: Removable front edge is convenient for grinding near wall or edge. Soft brush can from escaping and help move tools on the . Dust Work: With this dust cover, you can have a dust work experience, which is not only good for your work, but also good for your health. High Strength: The dust cover is made of PVC material, which is high in strength, wear resistance, easy to release and clean, just take some simple steps to install. Spec: Item Type: Grinder Dust Cover Material: PVC How to Use: Installation Steps: 1. Measure the outer diameter of the head, and adjust the inner diameter of the bracket to the same size (48‑76mm adjustable). 2. Loosen two hex screws on the bracket, and cover the head with a dust cover. 3. Clip the protruding point of the inner wall of the bracket into the anti skid slot of the machine head and tighten the hoop. 4. Tighten the hex screw on the bracket. PackageList: 1 x Grinder Dust Cover 1 x Connector 2 x Screw 1 x Wrench 1 x Gasket Package List 1 x Grinder Dust Cover 1 x Connector 2 x Screw 1 x Wrench 1 x Gasket