*KeyFeatures *PREMIUM QUALITY-High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use. *EXCELLENT PERFORMANCE-Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance. *REINFORCED STABILITY-Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation. *ADJUSTABLE TAP WRENCH-Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot. *MOST POPULAR SIZES INCLUDED-This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included *Friendly NoteThis product is only suitable for repairing, not applicable for heat treated products and coating products. ******************************************************************************************************* *Specifications Material: Tungsten Steel Sub-Type: ENGINEERING TAP AND DIE SET Tap Holder: M2 - M12 (1/16" - 1/2") Tap Holder: M6 - M20 (1/4" - 3/4") Tap Wrench: T bar Die Holder: Total length 200 mm (1" diameter bore) Die Holder: Total length 270 mm (1 1/2" diameter bore) Taper Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5) Plug Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5) Dies: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5) ******************************************************************************************************* *Pakcage Content 2 x Tap holders (different size) 1 x T- bar tap wrench 2 x Die holder (different size) 35 x Taper taps 35 x Plug taps 35 x Dies 1 x Portable Storage Case