Temperature Humidity Transmitter High Accuracy Wall Mounted Meter Sensor 0~10V Analog Item Type: Temperature Humidity TransmitterProduct Size: Approx. 147 x 88 x 41mm / 5.79 x 3.46 x 1.61in Dust Proof Protection Grade: IP65 Output Interface Wiring: The standard configuration of the device is to have 2 independent analog outputs Material: ABS Weight: 157 g / 5.5 oz(approx.) Specific Wiring:ItemCircuit identificationDescriptionPower supplyVCCPositive powerGNDNegative power / negative signalOutputTHPositive temperature signalRHPositive humidity signalParameter: DC power supply (default) DC 24V Maximum power consumption Current output 1.2W Voltage output 1.2W A accuracy Humidity ±2%RH(60%RH, 25℃) Temperature ±0.4℃(25℃) B accuracy Humidity ±3%RH(60%RH,25℃) Temperature ±0.5℃(25℃) Temperature range -40℃~+120℃,default -40℃~+80℃ Humidity range 0%RH-100%RH Transmitter circuit working temperature and humidity -20℃~+60℃, 0%RH~95%RH(non condensing) Probe operating temperature -40℃~+120℃, default-40℃~+80℃ Probe working humidity 0%RH-100%RH Long term stability Humidity ≤1%RH/y Temperature ≤0.1℃/y Response time Humidity ≤8s(1m/s wind wpeed) Temperature ≤25s(1m/s wind wpeed) Output signal Voltage output  0~10V Load capacity Voltage output Output resistance≤250Ω Current output ≤600Ω Hole Size Approx. 70mm / 2.76in Parameter settings Modify directly through software settings or buttons Product Selection: RS- Other standards WS- Temperature humidity transmitter sensor V10- 0~10V voltage output Common Problems and Solutions:  No Output or Wrong Output Possible Causes:  1. The wrong range corresponds to the PLC calculation error. For the range, please refer to the technical specifications in the first part. 2. The wiring method is incorrect or the wiring sequence is wrong. 4. The distance between the transmitter and the collector is too long, causing signal disorder. 5. The PLC acquisition port is damaged. 6. Equipment damage.