No sensor programming Required : The Tire Pressure Sensor is and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning". Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained professionals. Part Number:52933-D9100 MPREHENSIVE VEHICLE COVERAGE Installation Process: Loosen the tire: the valve cap and core and deflate the tire. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. Dismount the sensor: With a screwdriver the fastening screw and sensor from the Valve stem, then loosen the nut and the valve. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. Mount the tire: Place the tire on the rim, making sure that the valve the separation head at an angle of 180 degrees. Mount the tire over the rim. Fit Car: For G90 2017-2018 For 2016-2019 For IONIQ 2017-2019 For 2018 For 2018 For CADENZA 2017-2018 For 2017-2019 For 2015-2019 For 2017-2019 Colour: black Material: ABS Package Contents: 4 x Tire Pressure Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.