6 x 10/100M RJ45 ports (access), 2 x 10/100M RJ45 ports (uplink). Designed for industrial control, network system integration, LAN setup, and Ethernet development. Suitable for surveillance, alarm systems, public address, access control, video intercom, parking management, traffic systems, power systems, and other network-based low-voltage digital applications. Complies with standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3x, IEEE 802.1p, ANSI/IEEE Std 802.3. Supports protocols: CSMA/CD, IP. Model: AD6F-2C. Compatible with UTP or STP cables, Category 5 or Cat6, up to 100m maximum length. Optical wavelength options: 850nm, 1310nm, 1550nm. Single-mode single-fiber transmission distance: 25-120km. Single-mode dual-fiber transmission distance: 25-120km. Port configuration: 6 x 10/100M Ethernet ports (RJ45) for access, 2 x 10/100M RJ45 uplink ports. Wiring sequence: 1 - Orange/White, 2 - Orange, 3 - Green/White, 6 - Green. PoE support: Ports 3-8 support passive PoE (non-standard), requires use with a power separator. Pinout: 4 - Blue, 5 - Blue/White (positive), 7 - Brown/White, 8 - Brown (negative). Operation mode: 100Mbps electrical hybrid power. Uplink mode: 100Mbps RJ45 Ethernet connection. Flow control: Full duplex with IEEE 802.3x; half duplex with backpressure. Switching method: Store-and-forward. Layer: Layer 2. Backplane bandwidth: 1Gbps. MAC address table: 4K entries. Latency: 9.6s. Bit error rate (BER): < 10. Power input: DC 6V56V. Power consumption: < 5W. MTBF: 10 million hours. Operating temperature: -40C to +70C. Storage temperature: -40C to +80C. Humidity range: 5%90% non-condensing. Color: Black. Material: Plastic. Dimensions: 125 x 70 x 25mm. Package includes: 1 x PoE Switch.