Description: Brand: Easy to Colour Name: Scratch Repair Suit Color: Grey Warranty Period: 18 months Hardening time: about 1-2 hours room temperature Preservation and abandonment methods: After use, please cover the pen and keep it properly in a cool and ventilated place below 40 C. Avoid direct sunlight. Do not put it in a place where children can reach and completely use up the material in the tube before discarding it. Usage Automotive paint money, used to fill the pits, deep scratches or paint peeling within 2mm depth of baking paint. Packaging Content Small fill, special scraper, grinding sandpaper Use Attention Do not use outside the mark of this product. Please use it in a dry and well ventilated place. If the patch is too thick, the interior will not be completely hardened, so the thickness of the patch should be controlled in about 2 mm pits. 10-30 degrees is the best temperature for filling, too high or too low will affect the drying time of filling. In addition, use below 0 degrees may not be able to dry. Specifications: Usage 1. Foundation treatment First grind the depression or scratch with the attached 320 water sand paper the grinding area must be a little larger than the depression or scratch, then wash the dirt and grease and dry them. 2. Recharge landfill Please extrude appropriate amount of filling according to need and fill the thin filling with special scraper, slightly higher than the surrounding. 3. Supplementary grinding After complete hardening about 1-2 hours at room temperature, grind flat with 320_water sandpaper. Repeat steps 2-3 if bubbles form or small pits. 4. Finish grinding Polish the patch with water sandpaper to make it smooth. Package Included: 1 * small sandpaper pad; 1 * special scraper; 1 * 15g scratch repair agent; 3 * abrasive water sandpaper;