Top 5 Reasons to Get AdblueOBD2 Emulator for Trucks:1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.<br>2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.<br>3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.<br>4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.<br>5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.<br><br>AdblueOBD2 Emulator for Trucks AdBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.<br>Installation and Calibration for Trucks:<br>1. Pull the Key out from the ignition.<br>2. Remove the following Fuses (For )<br>Terminal - 15<br>Terminal - 30<br>3. Plug adBlueOBD2 into OBD2 connector<br>4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.<br>5. If any fault light appears on dashboard, delete via service scanner.<br>Material:plastic<br>colour:As shown<br><br>Package Contents:<br>1 * adBlue OBD2 Emulator Box Interface<br><br>Only the above package content, other products are not included.<br>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.