Crystal Filter® FHPP-10BB Big Blue 10' filter housing, 1' female inlet/outlet: Made of reinforced polypropylene, this Big Blue filter housing meets the needs of high-capacity filtration, including high-flow and heavy-sediment applications. This large filter housing is suitable for the use of specific cartridges (4 1/2' diameter). FHPP-10BB Big Blue 10' filter housing, 1' female inlet/outlet - Technical characteristics: - Flow rate: up to 3 m³/hour. (depending on the starting pressure and flow rate, the cartridge used, the tolerated pressure drop, etc.) - Maximum operating pressure: 90 psi / 6 bars - Minimum operating temperature: 2°C - Maximum operating temperature: 38°C - 1' connections - Length: 10' - Dimension between the inlet and outlet of the housing: 186.41 mm - Integrated vent - Buna seal Housing delivered without cartridge. Crystal Filter® FHPP-10BB Big Blue 10' filter holder housing, 1' female inlet/outlet - Precautions for use: READ BEFORE INSTALLATION - For use with cold water only. (2-38°C) - Do not use with chemical solutions. - Do not use this filter if damage or cracks are present. - Maximum pressure of 90 psi / 6 bar. - Install a pressure regulator if your water pressure may, at any time, exceed 80 psi / 5.5 bar. The pressure regulator must be installed before the filter housing (protects against water pressure exceeding the maximum pressure). - Set the pressure regulator to 70 psi / 5 bar or less. - Before removing the filter bowl, turn off the water supply and release the pressure. CAUTION To ensure a seal between the head and the bowl and to avoid any risk of leakage, the O-ring must be correctly inserted in the groove. tank. Regularly lubricate the seal with a suitable lubricant. PROTECT THE FILTER HOUSING from frost, direct sunlight, or other sources of UV rays to prevent filter housing failure. Operating the filter housing at a pressure higher than recommended may result in personal injury or property damage.