Operating Instructions: Into the anti-theft: 15 seconds after each turn off the 1, said the system has entered the anti-theft state, then start the button lights turn off, the whole car power, start operation is invalid..Exit the anti-theft: When the ID sensor card near the car in the induction coil area, this time the tweeted 2, said the system has been revoked anti-theft, start button immediately power flash, the vehicle can start at any time.A key to start: foot brakes, short press start button 1 after the release, that is, the vehicle automatically activated after 0.5 seconds.A key off: foot brakes, short press the start button 1 after the release, that is, the vehicle immediately turn off.A key to open the sound: do not step on the foot brake, short press a key to start the button to open the sound, the function as the key hit the first file.A key to open the instrument panel: do not step on the foot brake, has been opened on the basis of sound and then press a key to start the button to open the instrument panel, then the instrument panel power, function as the key hit in the second file.Parameters: Operating voltage: DC = 12V, no support 24V power supply.Standby current: 8mA (Note: continuous standby up to a month).Button display: blue light (Note: in the -resistant state of the blue light off, anti-theft after the anti-flash)Into the anti-theft: each time off the fire 15 seconds the system automatically locks the engine, the whole car off, the button lights off.Exit the anti-theft: on the using the ID card proximity sensor coil, the tweeted 2 out of the anti-theft.Brake light output flashing voltage: DC = 12V (Note: the output time controlled by the foot brake).Brake light output form: each brakes after the first brake light flashing 4, and then long bright, loose feet off..Alarm: brake light alarm, when the car on the illegal brakes, the brake light will flash alarm for 15 seconds.Use Conditions: can be used for no remote control and no anti-theft models, such as caravans, small A0 car, after installation, the vehicle will have a key to start and a key to turn off the function, dark lock anti-theft function, brake flash function and brake alarm function.B: can be used for the installation of such as iron general anti-theft device, PLC alarm and the installation of ordinary anti-theft vehicles, the installation will be more function protection, security greatly increased, also has a key to start and a key off Function, dark lock anti-theft function, brake flash function and brake alarm function.C: can be installed with the PKE smart keyless entry into the anti-theft device used to make the vehicle more intelligent and humane, also has a key to start and a key to turn off the function, dark lock anti-theft function, brake flash function and brake alarm functionNote:When the installation of a key to start plug the key screwed to the file to the original car steering wheel lock, this time to the original car lock behind the ignition plug unplugged to prevent the key in the file when the original car audio powercolour: BlackMaterial: ABSPackage Contents:1 set * rfid smart engine start stop push button1*English instruction manualOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.