Standard 2 Relay Output Function DIN Rail Thermostat with Sensor NO NC Common -40~110°C DIN Thermostat with sensor, High/Low Temperature 2 Alarm Relay NO NC COMMON Output 7A/250VAC AC90~260V Features: - Strong anti-interference ability, stable performance, simple circuit and high precision; the outer shell adopts a DIN rail casing, which is easy to install and features a sleek appearance. - Includes adjustment function and digital filtering. - Standard 2 relay output function, contact capacity 7A/250VAC. Specifications: - Power supply: AC90~260V; power consumption less than 2W (other power supplies available on request) - Measuring accuracy: 0.5%FS - Measuring range: -40~110°C - Display character height: 0.36 inches, high brightness red LED (other colors available on request) - Operating environment: -10~60°C (relative humidity below 80%) - Dimensions: 110 x 36 x 60 mm - Sensor length: 1.5m Package included: - 1 x DIN Rail Thermostat - 1 x Sensor Code Table: - TY1: Relay 1 output alarm type 0: Upper limit alarm, temperature AL1, relay closes, (AL1-HY1), relay opens. 1: Lower limit alarm, temperature AL1, relay closes, (AL1+HY1), relay opens. 2: Upper and lower limit alarm, temperature AL1, relay closes, HY1, relay closes. - AL1: Relay 1 action value: -40.0~130.0°C - HY1: Relay 1 return difference: -40.0~130.0°C - TY2: Relay 2 output alarm type 0: Upper limit alarm, temperature AL2, relay closes, (AL2-HY2), relay opens. 1: Lower limit alarm, temperature AL2, relay closes, (AL2+HY2), relay opens. 2: Upper and lower limit alarm, temperature AL2, relay closes, HY2, relay closes. - AL2: Relay 2 action value: -40.0~130.0°C - HY2: Relay 2 return difference: -40.0~130.0°C - SEC: Relay action delay value: 0–999 seconds When relay AL1 or AL2 reaches operating conditions, it delays action by SEC seconds. Delay is disabled when set to 0. - LC: Temperature deviation correction value: -20.0~20.0°C Display value = Measurement value + LC