Arcade 48mm (187) Microswitch Terminals 2 Pin 8-Pin to 5-pin Conversion Harness Wires for Jamma MAME Bartop Cabinet Machines Arcade 4.8mm (.187") Microswitch Ternimals 4.8mm Ternimals 2 Pin 8-Pin to 5-pin Conversion Harness for Jamma MAME Bartop Cabinets Machines The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187 microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187 terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick. For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness. By using this 8-Pin to 5-pin Conversion Harness, you can interface most joysticks with .187 microswitch terminals through to a Sanwa JLF-H or JST-XH cable, which makes connection simple. Feature * Interfaces to a Sanwa JLF-H or JST-XH cable * Converts joysticks with standard .187 microswitch terminals for use with a Sanwa JLF-H or JST-XH cable. Connecting Wire Colours for QANBA Q4 RAF Crown conversion harness: RED = UP ORANGE = DOWN GREEN = LEFT YELLOW = RIGHT BLACK = GROUND Suit for: This conversion harness is suitable for any joystick that features 4.8mm (.187") microswitch terminals. This Listing Include: One pcs 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness We care your order _x000D_