Condition: 100% Brand New <br>Item Type: USB Tester <br>Material: ABS <br>Color: Black, White (Optional) <br>Input Voltage: 4-30v <br>Voltage Resolution: 0.01V <br>Test Current: 0.05A-3.50A <br>Current Resolution: 0.01A <br>Capacity Range: 0-19999mAH <br>Accuracy: Plus or Minus 1% <br>Road Consumption: 0.1Ω <br>Test Content: Battery Voltage, Current, Discharge Capacity (10 sets of data in total) <br> <br>Instructions for Use: <br>1. Measuring voltage and current: plug the USB male head into a 5V charger, plug the female jack into a mobile phone and other devices, and directly read out the voltage and current parameters <br>2. Measure the quality of MicroUSB cable: plug the mobile phone and other devices into the female jack, first plug the 5V charger with the male head of the machine, remember the voltage, and then use the Micro USB cable from the 5V charger to the Micro USB hole of the machine to remember the voltage and voltage gaps The smaller the MicroUSB cable, the better the quality. <br>3. Measure the output capacity and efficiency of the mobile power supply: first connect the machine to the mobile power supply, turn on the mobile power supply, long press the button until the capacity data returns to zeroing, insert the mobile phone and charge it multiple times until the mobile power supply is powered off and automatically shut down. The next time the machine is turned on, the display capacity is the mAH output from the mobile power supply. Note that this mAH is much smaller than the nominal mAH. The output mAHxoutput voltage 5V / battery mAHxbattery voltage 3.7V = mobile power efficiency. <br>4. Data switching: click the button to switch to the next group of data, double-click the button to switch to the previous group of data. <br>5. Data reset: Press and hold the button for more than 3 seconds to reset the data in the current group.<br>1、USB tester, can be used to measure battery voltage, current, discharge capacity, etc. <br>2、Equipped with LCD backlight display, which can display voltage, current and battery capacity data at the same time for easy viewing. <br>3、Can be used to test the charging voltage and current of electrical appliances such as mobile phones, tablets, mobile power supplies and so on. <br>4、Support multiple sets of detection data saving, power down saving function, can detect the output battery capacity of mobile power supply. <br>5、Plug the USB male connector of the detector into a 5V USB charger, plug the female jack into a mobile phone, tablet, mobile power supply and other devices, and directly read the voltage and current parameters. 6、Test the output voltage and current of the power supply and mobile power supply (it must be matched with the load device): plug the detector USB male into the 5V USB charger, and plug the bus into the USB load device to directly read the voltage and current parameters.<div>1 x USB Tester</div>