M.2 NVME SATA SSD Docking Station USB 3.2 20Gbps NVMe/SATA NVMe Reader Duplicator Offline Clone UASP Aluminium Design

3 149,00 Kč
doprava ZDARMA

M.2 NVME SATA SSD Docking Station USB 3.2 20Gbps NVMe/SATA NVMe Reader Duplicator Offline Clone UASP Aluminium Design

  • Značka: Unbranded

M.2 NVME SATA SSD Docking Station USB 3.2 20Gbps NVMe/SATA NVMe Reader Duplicator Offline Clone UASP Aluminium Design

  • Značka: Unbranded
Doporučená prodejní cena: 4 699,00 Kč
Cena: 3 149,00 Kč
Ušetříte: 1 550,00 Kč (32%)
Prodal(a):
3 149,00 Kč
doprava ZDARMA

Skladem

Přijímáme následující platební metody

Popis

The M.2 NVMe docking station is designed to simplify fast storage transfers, cloning, and drive compatibility with a single, compact enclosure. Key features and benefits - Fast data transfer via USB 3.2 Gen 2 with UASP - The docking station supports USB 3.2 Gen 2 and UASP, with a theoretical maximum speed up to 20 Gbps for rapid data transfer and reduced wait times. - Important usage note - For data transfer or offline cloning, M.2 NVMe SSD and SATA SSD cannot be used at the same time; otherwise only the first SSD (SSD A) will be recognized and the second (SSD B) may not be detected. - Offline cloning for quick duplication - The dock supports offline cloning. Insert two SSDs into the corresponding slots and press the clone button for 5 seconds to start the process. - Cloning precautions - Before offline cloning, ensure the target SSD capacity is equal to or greater than the source SSD capacity by checking both drives in Windows Disk Management. If four blue lights flash, the clone has failed. - Broad SSD compatibility and sizes - Supports M.2 PCIe NVMe SSDs with M-Key or M+B Key and M.2 SATA SSDs with M+B key. Supported M.2 sizes: 2230, 2242, 2260, 2280. A single dual NVMe/SATA SSD dock enables use of different SSD sizes. - One cable for all connections - Comes with a USB-C to USB-C/A cable, so desktops or laptops with USB-A or USB-C ports can be powered and connected with one cable. - Wide system compatibility - Compatible with Windows, macOS and Linux. Plug and play, no driver required. Use scenarios - OS upgrade or migration - Clone your operating system drive to a new NVMe SSD offline, then replace the old drive to complete the upgrade without external drivers or software. - Quick backups and large data transfers - Transfer large media collections or project files between NVMe and SATA SSDs, using a single external dock connected via USB-C or USB-A. - Flexible drive configuration for mixed sizes and keys - Use different M.2 sizes (2230/2242/2260/2280) and keys (M-Key or B+M Key) in a single dock to accommodate various drives for archival, testing, or deployment tasks. Compatibility and performance details - Interface and performance - USB 3.2 Gen 2 with support for UASP, enabling high-speed data transfer up to the theoretical maximum for the interface. - Drive support - M.2 PCIe NVMe SSDs (M-Key or M+B Key) and M.2 SATA SSDs (M+B Key) are supported. - Form factors and sizes - Supports 2230, 2242, 2260, and 2280 length M.2 drives. - Cable and port flexibility - Equipped with a USB-C to USB-C/A cable for use with both USB-A and USB-C hosts. - Drive management and status indicators - Cloning status and drive activity are indicated by the built-in lights; ensure proper operation by following cloning instructions and troubleshooting steps outlined above. Notes on safety and operation - Follow the cloning instructions precisely: do not mix NVMe and SATA drives during data transfer or cloning unless the device explicitly supports mixed operation for a given task. - Verify target drive capacity before cloning to avoid data loss or clone failure. - If you encounter clone failures (e.g., four blue lights flashing), stop and re-check drive capacities and connections before retrying. This description preserves the product’s features, models, functions, and intended use cases while presenting a clearer, customer-friendly overview.
  • Fruugo ID: 395735351-845408624
  • EAN: 186637347548

Doručení a vrácení

Odesláno do 24 hodin

  • STANDARD: ZDARMA - Doručení mezi po 06 října 2025–st 22 října 2025 - ZDARMA

Doprava od Čína.

Děláme, co můžeme, aby k vám produkty, které si objednáte, dorazily kompletní a splňovaly vaše specifikace. Pokud však objednávka dorazí nekompletní, produkty jsou rozdílné od těch, které jste si objednali, nebo existuje jiný důvod k nespokojenosti s objednávkou, můžete objednávku nebo jakékoliv v ní obsažené produkty vrátit a obdržet za ně plnou náhradu. Zobrazit kompletní zásady vrácení

Podrobnosti o shodě produktu

Přečtěte si prosím níže uvedené informace o shodě specifické pro tento produkt.

Následující informace poskytuje nezávislá třetí strana prodejce tohoto produktu.

Výrobce:
V následujících informacích jsou uvedeny kontaktní údaje na výrobce příslušného výrobku prodávaného na Fruugo.

  • Shenzhen Kulomi Technology Co., Ltd.
  • Shenzhen Kulomi Technology Co., Ltd.
  • 401-13, Jinhe Building, 8 Xinhe Street, Maan Tang, Bantian
  • Longgang, Shenzhen, Guangdong
  • China
  • Shenzhen
  • CN
  • 518129
  • utopiadealsta@outlook.com
  • 13380310353

Odpovědná osoba v EU:
V následujících informacích jsou uvedeny kontaktní údaje na odpovědnou osobu v EU. Odpovědná osoba je určený ekonomický subjekt působící v rámci EU, který je odpovědný za dodržování požadavků stanovených pro příslušný výrobek prodávaný do Evropské unie.

  • Axitera GmbH
  • Axitera GmbH
  • Kreuznacher Str. 30
  • D-60486 Frankfurt am Main, Hessen
  • Germany
  • Frankfurt am Main
  • DE
  • 60486
  • successservice3@gmail.com
  • (+49) 6934873848
  • https://seller.kuajingmaihuo.com/settle/qualification-service