Manual High Pressure Air Pump Portable Inflator with Pressure Gauge for Oxygen Cylinder Diving

3 449,00 Kč
doprava ZDARMA

Manual High Pressure Air Pump Portable Inflator with Pressure Gauge for Oxygen Cylinder Diving

  • Značka: Unbranded
Prodal(a):

Manual High Pressure Air Pump Portable Inflator with Pressure Gauge for Oxygen Cylinder Diving

  • Značka: Unbranded
Doporučená prodejní cena: 4 499,00 Kč
Cena: 3 449,00 Kč
Ušetříte: 1 050,00 Kč (23%)
Prodal(a):
3 449,00 Kč
doprava ZDARMA

Skladem

Přijímáme následující platební metody

Popis

Features:Made of high quality stainless steel, anti-rust and durable. High pressure air pump by hand, 53cm/20.9in length air pump tube. Simple to operate, making diving become easy, no need to carry large scuba.With a pressure gauge on it, you can know when to stop inflating. Portable and practical, essential accessory for diving. Specification:Material: Stainless SteelColor: Shown as picturesAir Tube Length: Approx. 53cm / 20.9inConnector Diameter: 3.1cm / 1.2inConnector Length: 9cm / 3.5inWeight: Approx. 2840gPackage List:1 * High Pressure Air Pump (with Connector and Air Tube)1 * Wrench(Size: 14.8 * 5 * 0.25cm / 5.8 * 2.0 * 0.1in)2 * Packages of Accessories1 * ManualNote:1. High-pressure air pump, in the process of air inflating due to up and down friction, resulting in fever, this phenomenon is normal.2. The phenomenon of oxygen cylinder respirator can't be inflated: firstly, when oxygen cylinder respirator is delivered, it does not contain gas, secondly, check the high-pressure pump before inflating the high-pressure pump, assemble it according to the instructions, install the gasket rubber ring, tighten the exhaust valve, and then inflate it. This product is different from oxygen pumps such as basketball, volleyball. Effectively, please be patient to inflating for two or three minutes before the pressure gauge will change. It takes three men to inflating about 16 minutes for each oxygen cylinder to fill up. Within 3000PSI, it is within the normal range. Over 3000PSI may burst (please don't inflating too full).3. Oxygen cylinder head and body should be checked for tightness, good connection and not standing above the oxygen cylinder when inflating. Be careful not to inflate the oxygen cylinder to a certain pressure. Oxygen has certain impact. Please pay attention to safety.4. When the pumpis finished, please notice that it is dangerous to twist the exhaust valve of the high-pressure pump and suddenly pull out the connecting port between the pump and the oxygen cylinder.5. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..
  • Fruugo ID: 416656014-879131033
  • EAN: 7540131903014

Informace o bezpečnosti produktu

Přečtěte si prosím níže uvedené informace o bezpečnosti produktu specifické pro tento produkt

Následující informace poskytuje nezávislá třetí strana prodejce tohoto produktu.

Bezpečnostní štítky produktu

CE Mark
bezpečnostní upozornění: Warning: Please read the product instructions carefully before use to ensure correct use.
sériové číslo: 7540131903014

Doručení a vrácení

Odesláno do 2 dnů

  • STANDARD: ZDARMA - Doručení mezi út 14 října 2025–út 21 října 2025 - ZDARMA

Doprava od Čína.

Děláme, co můžeme, aby k vám produkty, které si objednáte, dorazily kompletní a splňovaly vaše specifikace. Pokud však objednávka dorazí nekompletní, produkty jsou rozdílné od těch, které jste si objednali, nebo existuje jiný důvod k nespokojenosti s objednávkou, můžete objednávku nebo jakékoliv v ní obsažené produkty vrátit a obdržet za ně plnou náhradu. Zobrazit kompletní zásady vrácení

Podrobnosti o shodě produktu

Přečtěte si prosím níže uvedené informace o shodě specifické pro tento produkt.

Následující informace poskytuje nezávislá třetí strana prodejce tohoto produktu.

Výrobce:
V následujících informacích jsou uvedeny kontaktní údaje na výrobce příslušného výrobku prodávaného na Fruugo.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Odpovědná osoba v EU:
V následujících informacích jsou uvedeny kontaktní údaje na odpovědnou osobu v EU. Odpovědná osoba je určený ekonomický subjekt působící v rámci EU, který je odpovědný za dodržování požadavků stanovených pro příslušný výrobek prodávaný do Evropské unie.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795