Description: This submersion pump is a necessary spare tool to discharge diesel oil for harvester, large agricultural machinery. With a flow rate of 12L/min and 8500r RMP, it is of high efficiency in low noises. It is suitable for pumping diesel, kerosene and water liquids. Features: This submersible pump is a necessary spare tool to discharge diesel oil for harvester, large agricultural machinery. Put diesel pump in diesel tanks or barrels when diesel pump is starting work. No-load operating is not permitted. Easy to use. The pump bottom should be completely submerged in liquid and properly connected to power supply. It can be used to discharge diesel, water, kerosene, also can be used in bilge discharge and pool drainage. This pump is strictly forbidden to transport gasoline, alcohol and other flammable liquids. How to Use: 1. The pump pumping should first take a good self-prepared oil hose, and then the pump completely into the clean oil or water. 2. The pump, after use, should put the pump from the oil or water out. 3. The bottom of the oil pump filter is with stainless steel filter, so that it pumping out more clean. Bottom filter with a threaded interface, convenient disassembly, repair, replacement, to achieve the purpose of repeated use. 4. The pump maximum output of oil of 12 L/min. Specifications: Material: Stainless Steel Color: Golden Pumped Medium: Diesel, Water, Kerosene Voltage: DC 12V Maximum Load Current: 1.5A Motor Racing Speed: 8500r/min Flow: 12 L/min Lift Head: 2m/6.6ft Size(L * Diam. ): As Picture Shown The Tubing Diameter: 16mm/0.6in Cable Length: Approx. 3 meters/9.8ft Weight: Approx. 314g Package Includes: 1 * Pump Note: 1. NOT use this pump for gasoline or chemical liquid. Petrol or any flammable liquids are strictly prohibited to use with this pump. This pump is suitable for pumping diesel, kerosene and water. 2. This pump should be used in an intermittent way, which means do not use the pump more than 20 minutes continuously, and you'd better let it rest 10-15 minutes after each time working and then start it again. 3. Run only when pump is submersed in liquid, never run dry, and take out the pump from the liquid promptly after finishing pumping. 4. Please confirm your voltage and power is suitable for this pump(voltage can be ranged ±5%) , and take notice of the negative and positive pole linking. .