Product name:Radiolink Crossflight Flight Controller 2-12S 10 PWM FC wih OSD Module for FPV Racing Drone RC Car Boat Precise details: Specifications: Connector: JST GH1.25 Connector PWM Output: 10 PWM Output Mavlink UART: 2(without CTSRTS) USB Port: 1(Type-C) GPS UART/I2C Port: 1 RC In Signal Input: PPM/SBUS RSSI Output: Do not support OSD Module: OSD Module Integrated ESC Protocol: PWM DSHOT Protocol: Do not support ONESHOT Protocol: Do not support Neopix Led: Support Gripper Function: Support RTK:Support USB Voltage: 5V±0.3V Servo Voltage: Not applicable Operating Temperature: -40~80℃ Adaptable Models: 3-8 copter/Airplane/Helicopter/Car/Boat Dimention: 39.7*39.7*13mm (1.56"*1.56"*0.51") Weight: 16.5g(0.58oz), 54g(1.9oz when all the connect wires included) Power Module Specifications: Input Voltage: 2-12S Input Current: 90A Output Voltage: 5.1V Output Current(BEC): 2.5A Input Current(connect to one ESC only): 20A Hardware Specification: Processor: HC32F4A0PITB Gyro: ICM42670 Compass: VCM5883 Barometer: LPS22HB FRAM: Without FRAM, use the internal flash to store parameters, 2617 waypoints for multi-copters, and 2623 waypoints for airplanes Crossflight FC Main Features: -Vibration Damping by Software: Ensure the accuracy of sensor data at all times, achieve better Altitude Hold effect, and make the flight more stable. -OSD Module Integrated: Support real-time graphically display OSD information such as the flight direction and position of the aircraft without the need for an external OSD module. -10 Channels PWM Output: Adaptable to 3-8 Axis Multirotor, Airplanes, helicopters, cars, boats and multiple industries. -Mini Size as F4: Only 39.7*39.7*13mm and 16.5g, helps save space and reduce total weight to lengthen the flight time. -Easier Installation and Setting: Offer comprehensive technical support including the usage guidance needed for all functions from basic use, PID parameter adjustment, log viewing, etc. of each model. -Automation Software Testing System: The same Automation Software Testing System as PIXHAWK and MiniPix helps realizes test automation from the sensor to connection ports and interface. Package List: 1x Crossflight Flight Control 1x Power Module (Supports 2-12s Battery) 1x Buzzer 1x I2C Adapter Board 1x Flight Control Status Indicator Light 1x Buzzer & Receiver Cable 1x Power Module Cable 1x I2C Adapter Board Cable 1x OSD Port Cable (Connect Image Transmission & Camera 2x TELEM1&2 Port Cable 1x Flight Control Status Indicator Light Cable 1x Double Sided Sticker 1x Double Sided Sticker 1x Usb Cable 1x Instruction Manual 1x Color Box