USR-TCP232-410S Serial Port RS232 RS485 To Ethernet Converter Device Server Modbus RTU To TCP Flow Control USR-TCP232-410S Modbus to Ethernet Converters Attention: We had update this device to new version! Features of entry-level Modbus to Ethernet converters USR-TCP232-410S. 1 RS232 and 1 RS485 Modbus to Ethernet converters 1 RS232 and 1 RS485 Modbus Serial to Ethernet Converters Power supply accepts wide voltage input range DC 5-36V Support TCP server/client, UDP server/client, https client, Virtual COM Support Modbus RTU to Modbus TCP Support flow control CTS/RTS, XON/XOFF Support 1 RS-232,1 RS-485 serial port to 1 10/100Base-T(X) self-adaptive Ethernet interface Configuration via Web Server page, AT commands, and Windows Utility System Information Processor Cortex-M4 Basic Frequency 120MHz Flash 512K byte Ethernet Port Number 1 Interface Standard RJ45 Rate 10/100 Mbps MDI/MDIX, auto switch between cross and direct connection Protection 2KV electromagnetism isolation, shell insulation blocking Network Protocol IP, TCP, UDP, DHCP, DNS, https, ARP, ICMP, Web socket, httpsd client Receive Buffer Max 16k bytes buffer Serial Port Number 2 (1*RS-232, 1*RS-485, can work at the same time) Interface Standard RS-232: DB9 pin type, RS-485: 3 wire (A+, B-, G) Data Bits 5, 6, 7, 8 Stop Bit 1, 2 Check Bit None, Even, Odd, Space, Mark Baud Rate RS-232: 600 bps ~ 230K bps, RS-485: 600 bps ~ 1M bps Flow Control RTS/CTS Buffer Send and receive 2k bytes respectively Protection RS-485: anti-static 2KV, lightning protection RS-485 Pull-up and Pull-Down Resistor 2.2 K Software Virtual Serial USR-VCOM Windows 2000 or higher (32 bit/64 bit) Configuration Built-in webpage, computer set-up software, serial command Basic Parameter Size 80 x 62 x 24 mm Operating Temp. -40 ~ 85C Storage Temp. -45 ~ 105C, 5 ~ 95% RH Input Voltage DC 5 ~ 36V Working Current 86.5mA(aver)@ 5V 44.3mA(aver)@ 12V Power