DSPIAE CG Series scribing guide tape 3G Model Carving Model Guide Tape Tool fq

279,00 Kč
doprava ZDARMA

DSPIAE CG Series scribing guide tape 3G Model Carving Model Guide Tape Tool fq

  • Značka: Unbranded

DSPIAE CG Series scribing guide tape 3G Model Carving Model Guide Tape Tool fq

  • Značka: Unbranded
Doporučená prodejní cena: 369,00 Kč
Cena: 279,00 Kč
Ušetříte: 90,00 Kč (24%)
Prodal(a):
279,00 Kč
doprava ZDARMA

Skladem

Přijímáme následující platební metody

Popis

Properties: 1.Using highly transparent eco-friendly PET material as base material to better recognize the markings in the model markings. 2.DSP IAE's unique printing technology: A scale linear is printed at a distance of 1mm on the surface of the marking tape, which is convenient for positioning when marking. 3.Special thickened material: It can be applied seamlessly to different model parts, there is no degreasing and adhesive residue. 4.Double-layer hot melt adhesive: The printed scale line is placed between the bottom and the top layer of adhesive tape, and the two layers of adhesive tape are fused together by the unique hot melt adhesive technology, so that the scale line does not fall off and is not scratched by external force. 5.Multiple sizes engraving tape to meet more engraving requirements. Combining the engraved lines has a better effect. The special acrylic adhesive is used as adhesive material, which becomes stronger when glued and leaves no adhesive residue when torn off. 6.Strong ductility and viscosity: It can also be freely used on model parts with curved surface, and the tape will not fall off due to insufficient adhesion. Instructions: 1. First prepare the parts to be engraved. First, design the milling with a pencil. After setting the engraving position point, mark the position point with a carving knife or a marking needle. 2.Cut off a piece of positioning tape, glue one side of the tape along the pre-drawn notch line, and use the scale on the notch tape to determine the distance of the notch line. 3.Use a push or hook knife to gently pull the tape along the side of the marking tape from one point back to the other. Repeat this process until the scratching is complete. Remember not to use force so as not to interfere with the scratching. Effect. 4. After the label is finished, the label tape can be removed. The recommended time for gluing the label tape to the part should not exceed 30 days, otherwise environmental influences can cause adhesive residues when detached. Scope of delivery: 1* DSPIAE CG Series Carving guide tape
  • Fruugo ID: 245860425-529957487
  • EAN: 9418870846894

Informace o bezpečnosti produktu

Přečtěte si prosím níže uvedené informace o bezpečnosti produktu specifické pro tento produkt

Následující informace poskytuje nezávislá třetí strana prodejce tohoto produktu.

Bezpečnostní štítky produktu

CE Mark
bezpečnostní upozornění: Not suitable for children under 36 months

Doručení a vrácení

Odesláno do 24 hodin

  • STANDARD: ZDARMA - Doručení mezi út 30 září 2025–pá 10 října 2025 - ZDARMA

Doprava od Čína.

Děláme, co můžeme, aby k vám produkty, které si objednáte, dorazily kompletní a splňovaly vaše specifikace. Pokud však objednávka dorazí nekompletní, produkty jsou rozdílné od těch, které jste si objednali, nebo existuje jiný důvod k nespokojenosti s objednávkou, můžete objednávku nebo jakékoliv v ní obsažené produkty vrátit a obdržet za ně plnou náhradu. Zobrazit kompletní zásady vrácení

Podrobnosti o shodě produktu

Přečtěte si prosím níže uvedené informace o shodě specifické pro tento produkt.

Následující informace poskytuje nezávislá třetí strana prodejce tohoto produktu.

Výrobce:
V následujících informacích jsou uvedeny kontaktní údaje na výrobce příslušného výrobku prodávaného na Fruugo.

  • Ebeis(HK) co., Limited
  • Ebeis(HK) co., Limited
  • Flat/RM 185G/Fhang Wai lnd Centre
  • No.6 Kin Tai ST, Tuen Mun, NT
  • Hongkong
  • HK
  • 999077
  • ebeishk@hotmail.com

Odpovědná osoba v EU:
V následujících informacích jsou uvedeny kontaktní údaje na odpovědnou osobu v EU. Odpovědná osoba je určený ekonomický subjekt působící v rámci EU, který je odpovědný za dodržování požadavků stanovených pro příslušný výrobek prodávaný do Evropské unie.

  • Yuan Li
  • Sea&Mew Consulting GmbH
  • Mittenhuber Stra?e 4
  • Neumarkt
  • DE
  • 92318
  • Compliance.EU@outlook.com
  • 4915224685061