Automatic Flushing And Drying Intelligent Toilet Seat

Product This product is an electronic bidet of the instantaneous water-heating type that washes the cleaning area with warm water and dries it with warm wind without using toilet paper while you sit on the warm toilet seat in the bathroom. Installing the Bidet is as easy as simply removing your original toilet seat and replace with it. No plumber needed. And with all the great functions set in a simple control panel, using the Bidet is totally hassle-free too. Key Features Oscillating wash Instant Heating Automatic deodorization Water-filtering Self-cleaning nozzles Twin nozzles Adjustable water temperature Adjustable washing position Energy-saving Adjust Water spraying-intensity Adjustable air dryer temperature Massage mode Built-in automatic body sensor Heated anti-bacterial seat Adjustable seat temperature Slow-closing lid Multi-safeguards Safety alarm Specification Plug:AU Fit hose 1/2" Comes with 1/2" 3 way connector Voltage: AC 220V Water pressure: 0.08 to 0.75 Mpa (0.8-7.5kgf/c) Water flow rate: wash: max 0.8L/min, bidet: max 0.95L/min Water pressure control: anus washing, bidet washing controlled by micro computer Washing power: 1600W Tank capacity: 0.55L Soft seat: when closing, the seat and cover fall slowly Seat power:45W Flushing water temperature control: 4 levels of adjustment (OFF, 33, 36, 40) Seat cushion heating control: 4-speed adjustment (OFF, 33C, 36C, 40C) Drying air temperature control: 32-48 adjustment Seat heating power: 45W Drying heating power: 250W Safety device: leakage protector Length of the power cable:1.5M/59.06IN Safety device: float switch, temperature sensor, temperature fuse Appearance size: 510*390*145mm/20.08*15.35*5.71in Inner diameter of seat ring: 300*200mm/11.81*7.87in Package Including Electric bidet x 1 Water inlet tube (length: about 80cm, inner diameter: 18.8mm) x 1 Bidet accessories (Package) x 1 User manual Suitable size for toilet seat cover: The toilet seat is an extended type, and the distance from the installation hole to the top should be between 46cm and 48cm; The distance between the installation hole and the water tank should be greater than 3cm Distance between installation holes: 11.5-19.5cm The distance from the water tank to the front end of the toilet should be greater than or equal to 51cm